Connecting And Removing The High-Pressure Hose - Stihl RB 200 Manual De Instrucciones

Storing accessories
Place the spray attachment in the
N
holder on the frame
Insert the high-pressure nozzles in
N
the holders on the frame
Filling with engine oil
NOTICE
The engine is supplied without oil.
Before using the engine for the first time,
fill with engine oil!
RB 200
1
Fill the engine oil at the filling
N
port (1)
Observe the instructions concerning
engine oil and fill quantity in the Kohler
owner's manual.
Connecting and Removing
the High-Pressure Hose
WARNING
To reduce the risk of severe injury from
high pressure spray, always shut off the
pressure washer and relieve any
remaining pressure in the line by
squeezing the spray gun trigger before
attempting to remove the high-pressure
hose from either the pump or the spray
gun.
Remove all sand and debris from
N
the connections
Connection to the high-pressure pump
Connecting
1
2
Push the high-pressure hose into
N
the high pressure connector (1)
Attach the union nut (2) and screw it
N
on and tighten by hand
Removing
Unscrew union nut
N
Pull the high-pressure hose off
N
pressure connector
English
13