Fitting, Removing Spray Lance; Fitting, Removing High-Pressure Hose - Stihl RE 109 Manual De Instrucciones

English

Fitting, removing spray lance

Spray lance
2
Press the spray lance (1) into the
N
mount on the spray gun (2), turn it
by 90° so that it engages
Removing
Press the spray lance (1) into the
N
mount on the spray gun (2), turn it
by 90° and pull it out of the mount
Nozzle
4
Insert nozzle (3) in spray lance until
N
the safety latch (4) engages – at
which point the safety latch button
will spring out again – the adjustable
fan jet nozzle has an anti-twist
device; orient this according to the
groove on the spray lance
44
Removing
Press the safety latch (4) and pull
N
out the nozzle (3)
1
3
+
Fitting, removing high-
pressure hose
RE 109, RE 119
Connecting the high-pressure hose
2
Push the coupling (1) onto the
N
connector (2)
Disconnecting the high-pressure hose
Unlock the high-pressure hose by
N
pulling the clutch (1) and remove
from the connector (2)
RE 129 PLUS
The high-pressure hose is already
connected.
RE 109, RE 119, RE 129 PLUS
1