Saunier Duval SDH 17-035 NW Manual De Usuario página 41

7.7.5 Temp function
2
Fig. 7.20 TEMP function selection.
Legend
1 TEMP button
2 TEMP indicator
This function displays the indoor setting temperature and indoor
ambient temperature on the Indoor Unit display.
Pressing the TEMP button will display:
Set temperature
Indoor ambient temperature
Outdoor ambient temperature
(Not available for this model)
SDH17-NW-U_EN - 05/14 - Saunier Duval
7.8
Fig. 7.21
Legend
1 HEATING indicator
2 COOLING indicator
3 TEMPERATURE indicator
4 ON-OFF indicator
5 DEFROST indicator
6 Infra-red signal receiver
7.9
Only use this function when the remote controller is broken or
has been mislaid.
In order to activate:
1
• Press the emergency operation switch.
• A beeping noise is heard which indicates that the function
has been put into operation.
Fig 7.22
Operating sequence:
• With the first press of the button, the unit enters into Auto
mode.
• With the second press of the button, the unit switches off.
i
OPERATING INSTRUCTIONS
Indicators of the indoor unit
1 2 3 4
Overview of the display in the indoor unit.
Emergency operation
Emergency operation/operation test switch.
NOTE:
During Emergency Operation, the unit operates in
AUTO mode by default.
5 6
EN
- 17 -