viii.
The indicator LEDs on the Blue Smart Charger will be illuminated to confirm the active
charge mode and settings implemented.
4.3 Bluetooth
a) Changing the PIN code
To prevent an unauthorised Bluetooth connection, it is highly recommended to change the
default PIN code.
To change the Bluetooth PIN code:
i.
Complete initial Bluetooth pairing and connection using the default PIN code
(000000)
ii.
Access the 'device options' by selecting the 'settings' icon (gear) in the top right
corner, then the 'device options' icon (three vertical dots).
iii.
Open the 'Product info' page by selecting 'Product info'.
iv.
Beside 'PIN code' select 'CHANGE' to open the 'Change PIN code' window.
13