Victron energy Blue Smart 12/4 Manual página 18

Subsequently, before attempting to re-connect it's also necessary to remove/clear the Blue
Smart Charger Bluetooth pairing information from any devices (mobile phones or tablets)
that were previously paired.
4.4 System reset
It is possible to perform a full system reset to restore all charger/battery related settings to
their default value; using the VictronConnect app.
Note that this does not reset any Bluetooth related settings, such as the PIN code or
pairing information.
To perform a system reset:
i. Access the 'device options' by selecting the 'settings' icon (gear) in the top right corner,
then the 'device options' icon (three vertical dots).
ii. Open the 'restore device' page by selecting 'Reset to defaults'.
iii.
Select 'YES' to reset all settings to factory defaults.
16