Vermeiren L3-Carpo 3 Manual De Instrucciones página 25

1
L
Always turn the scooter off before disassembling it.
L
Be careful not to cut or bruise yourself with the cables during assembling or disassembling.
TROUBLESHOOTING
The following list will assist you with the troubleshooting of your scooter.
Problem
The scooter refuses to go once started.
No indication of load level
The scooter refuses to go once started.
Load level insufficient.
Thermal safety fuses disengage.
Batteries cannot be charged.
SCOOTERS Instruction Manual
1 = Rear frame
3
2 = Front frame
3 = Safety pin
2
Cause
Key not in place or switched on.
•
Battery plug not connected (batteries not making
•
contact).
Thermal safety fuses disengaged.
•
Batteries defective (totally discharged).
•
Defective control unit.
•
Electronic box defective.
•
Loom of cables defective.
•
Motor/gears in neutral.
•
Potentiometer of the rocker meter defective/loose
•
Magnetic brake defective
•
Motor defective.
•
Electronic box defective.
•
Motor worked too hard (see "Technical details").
•
Thermal safety fuses defective.
•
Batteries not fitted correctly.
•
ON/OFF switch of the battery box not switched on.
•
Loading socket defective
•
Wrong charger.
•
Loading device defective
•
Last updated: Feb-09
K
9