Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
To reduce the risk of shock, remove vacuum cleaner from the charger base. Turn off
before performing any service or maintenance.
EMPTYING THE DUST CUP AND CLEANING THE FILTER
For best performance, empty the dust cup
after every use. Never operate the vacuum
cleaner without the dust cup and filter in
place.
1. Make sure the vacuum is turned off.
Remove the hand vacuum from the main
body.
To remove the hand
vacuum, press the release
button and detach the
hand vacuum from the
main body.
2. Press the dust cup release button and
separate the dust cup from the hand
vacuum body.
3. Remove the filter basket from the dust
cup. Empty the dust cup contents into a
waste receptacle.
VACUUM MAINTENANCE & CARE
The key to maximum performance is
having a clean filter. Cleaning the filter
after each use will help your vacuum
operate at peak efficiency.
Use only genuine Kenmore model number
57004 replacement filters in your Kenmore
vacuum. To purchase call 1-877-531-7321.
4. Remove the filter
from the filter basket.
With a soft brush, brush
accumulated debris from
the side screens of the
filter basket and from the
filter.
5. After much repeated use, it may be
necessary to wash the filter basket and
filter clean of accumulated dust. First brush
loose debris from both basket and filter
cloth, then hand wash basket and filter in
warm water. After washing, set both aside
and allow to air dry. IMPORTANT: The
basket and filter must be completely dry
before reuse.
6. Insert the clean, dry filter into the
basket, fit the basket into the dust cup,
and reconnect the dust cup to the hand
vacuum.
- 10 -
Publicidad
