TFA_No. 35.1147_Anleitung
06.10.2017
9:33 Uhr
COLORIS – Wireless weather station
• Connect the lead to the base station first, then plug the power adapter into the mains socket.
• Do not pull the plug out of the socket by its cable.
• Route the mains cable so it does not come into contact with sharp-edged or hot objects.
Caution!
Risk of injury:
• Keep these devices and the batteries out of reach of children.
• Batteries contain harmful acids and may be hazardous if swallowed. If a battery is swallowed, this can lead to serious internal burns and
death within two hours. If you suspect a battery could have been swallowed or otherwise caught in the body, seek medical help immediately.
• Batteries must not be thrown into a fire, short-circuited, taken apart or recharged. Risk of explosion!
• Low batteries should be changed as soon as possible to prevent damage caused by leaking.
• Never use a combination of old and new batteries together, nor batteries of different types. Wear chemical-resistant protective gloves and
safety glasses when handling leaking batteries.
Important information on product safety!
• Do not expose the devices to extreme temperatures, vibrations or shocks.
• Protect it from moisture.
• The transmitter is splashproof, but not watertight. Should you decide to use the transmitter in the outdoor area, choose a shady and dry
place.
24
Seite 13
COLORIS – Wireless weather station
5. Elements and buttons
5.1 Base station
A: Display (Fig. 1):
A 1:
Indoor temperature
A 2:
A 3:
Outdoor temperature
A 4:
A 5:
Reception symbol for the outdoor transmitter
A 6:
A 7:
Alarm symbol
A 8:
A 9:
Time/alarm time/date
B: Buttons (Fig. 2):
B 1:
SET button
B 2:
B 3:
+/RESET MIN/MAX button
B 4:
B 5:
COLOR MODE button
B 6:
C: Housing (Fig. 2):
C 1:
Power adaptor jack
5.2 Transmitter (Fig. 3):
D 1:
Support for wall mounting or table standing
D 2:
Indoor humidity
Outdoor humidity
Weather forecast with symbols and trend arrow
DCF reception symbol
ALM button
DIM button
COLOR SELECT button
Battery compartment
25