Recall Function
After switching off the hob [
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-related timers
The recall procedure is the following:
• Press the key [
• Then press [
The previous settings are activated again.
Bridge Function
This function allows the use of 2 cooking zones at the same time with the same features as a single
cooking zone. Booster function is not allowed.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop bridge
Control panel locking
To avoid modification of the setting of the cooking zones , particularly when cleaning, the control
panel can be locked (with exception to the On/Off key [
Action
Lock the hob
Unlock the hob
Clean function
The clean function guarantees a satisfactory temperature to clean your teppanyaki (see Maintenance
and cleaning chapter).
Each zone has its own clean function.
It is also possible to combine 2 cooking zones (bridge function), then to activate the clean function.
• Start up/stop the clean function:
Action
Activate the clean function
When the clean temperature is reached, the [ C ] becomes fixed.
Stop the function
Cleaning can be effected with positions 4, 5 or 6 from the slider.
], it is possible to recall the last settings.
]
] before the light stops blinking.
Control panel
Press display [
Press simultaneously on [ clean ]
of the 2 cooking zones
Slide on the "SLIDER"
which indicates the power
Press simultaneously on [ clean ]
of the 2 cooking zones
Control panel
Press [
] during 6s
Press [
] during 6s
Control panel
press [ clean ]
press [ clean ] or
press [
]
or slide on the "SLIDER"
]
]).
26
Display
[ 0 ]
[ 0 ] and [
]
[ 1 ] to [ 9 ]
[ 0 ]
Display
lock light on
lock light off
Display
[ C ] is blinking
nothing or [ H ]
[ 0 ] à [ 9 ]