Holmatro GCT 51 ST EVO 3 Serie Manual página 37

• Monitor the situation of the equipment and the structure continuously while using the equipment.
• Parts of an object that could fly off must be secured.
• Use only genuine Holmatro accessories and ensure that they have been attached correctly.
• Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
• Make sure that the deadman's handle does not become jammed.
• Stop immediately if the system makes strange noises or displays aberrant behaviour.
• Stop immediately if the equipment leaks oil. Oil escaping under pressure can penetrate the skin and
cause serious injury. Go immediately to a hospital with a person who is injected with oil for medical
help. Give a specification of the oil to the medical staff.
• Return inactive equipment immediately to the tool station.
• Always adhere to the safety regulations that apply to other equipment that is used in the operation.
2.11 Safety regulations with respect to maintenance
• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in an environmentally responsible way.
3 Description
3.1 Equipment
The combi tool can be used independently because of the battery-driven hydraulic system.
The tools are produced as hand tools that can be operated by one person.
The tools are suitable for cutting, spreading and squeezing constructional elements of vehicles during
rescue operations. They can squeeze material tightly or squash it and thus create weak pivots or places
that are easier to cut. They can also push parts apart. By placing accessories on the points, materials
can be pulled together.
3.2 Type designation
Example: GCT 5111 STA EVO 3
/i
Digit Example
1-3 GCT
4-7 5111
8-10 ST
11-14 EVO 3
3.3 Product identification
Refer to Fig. 2.
GCT 51** (ST) (STA) EVO 3
All manuals and user guides at all-guides.com
Description
G = Greenline
CT = Combi Tool
Type indication
Blank = standard
ST = Special Tactics
A = Army series
EVO 3 series
916.001.650_002
EN
37