Descargar Imprimir esta página

Holmatro GCT 51 ST EVO 3 Serie Manual página 52

Ocultar thumbs Ver también para GCT 51 ST EVO 3 Serie:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 106
EN
8.5.9
Spreading tips
Check the spreading tips for damage. Have the Holmatro dealer replace damaged parts.
Check that detachable tips fit good.
Check that the pin locks when fully engaged. (as shown in Fig. 8)
8.5.10
Accessories
Check the accessories for damage, dirt and completeness. Replace damaged accessories and
make sure that the accessories are complete.
Remove dirt with clean running water. Dry the accessories. Apply a thin coat of preservative oil to
the external steel parts.
8.6
Yearly dealer maintenance
We recommend having the equipment inspected, checked, set and tested once a year by a Holmatro
Certified Technician who has the appropriate knowledge and the necessary tools (see also section 1.7).
The Holmatro dealer can organize the yearly maintenance for you on a contract basis.
8.7
Packaging
In many regulations such as IATA (air), ADR (road) and IMO (sea), Li-Ion battery packs are considered
as dangerous goods. Please make sure that the goods are packed and transported in accordance with
the latest regulations. Consult your Holmatro dealer for detailed instructions.
8.8
Storage
8.8.1
Temporary storage
Store the tool and the battery pack in a dry and well-ventilated dust-free area.
Fasten the tool so it can not fall over to prevent oil leaking.
Place the blade tips over each other to prevent injury. Do not fully close the spreading arms / blades
so that the tool can be stored without pressure.
Check that the on/off switch is OFF.
Apply a thin coat of preservative oil to the external steel parts.
8.8.2
Long-term storage
For long-term storage, carry out the same actions as for temporary storage, as well as the following
additional actions:
Remove the battery pack from the tool.
Always store the battery packs in a dry and cool area. Temperatures above 45 °C (113 °F) can have
a negative affect on the life cycle of the battery packs.
WARNING
Avoid short-circuiting the battery pack. Make sure the connections do not come in contact
with metal objects or water. Never try to open a battery pack.
CAUTION
If not removed from the tool, a fully charged battery pack will discharge in 3 months.
CAUTION
If the battery pack is removed from the tool and is not being recharged, it will slowly loose its
energy. Make sure that the battery pack is recharged at least once every year.
52
All manuals and user guides at all-guides.com
916.001.650_002
GCT 51** (ST) (STA) EVO 3

Publicidad

loading

Este manual también es adecuado para:

Gct 51 evo 3 serieGct 51 sta evo 3 serie