2. If the battery pack is damaged or does not function correctly, replace the damaged battery pack.
3. Check the operation of the unit.
4. Check the unit for damage and leaks. If the unit doesn't work properly and/or leaks, have it
repaired by a Holmatro Certified Technician.
8.5.2
Light
•
Check the light.
•
Replace the battery if it gives little or no light.
•
Have a Holmatro Certified Technician repair the light if a new battery does not solve the problem.
8.5.3
Carrying handle
•
Check the carrying handle for damage. Replace a damaged carrying handle.
•
Check the attachment of the carrying handle. If necessary, fasten it firmly by tightening the bolts or
by re-tightening the knob.
8.5.4
Deadman's handle
•
Check whether the deadman's handle returns to the neutral position.
•
Check the operation of the deadman's handle. Have the Holmatro dealer repair the deadman's
handle if it does not function properly.
8.5.5
Blades
See Fig. 13.
•
Check the blades for damage. Have a Holmatro Certified Technician replace the blades when they
are damaged or the blade tips are damaged or worn.
•
Check whether the blades are straight. Have a Holmatro Certified Technician replace the blades if
there is more than 0.6 mm (C) separation.
8.5.6
Centre bolt
See Fig. 13
•
Check that the tightening torque of the centre bolt (B) is 50 Nm.
•
Spray Teflon lubricating oil on and between the moving parts of the centre bolt (B) while the tool is
opening and closing.
CAUTION
The centre bolt may not be removed. Contact a Holmatro Certified Technician.
8.5.7
Hinge pins
See Fig. 13.
•
Spray Teflon lubricating oil on and between the moving parts of the hinge pins (A) while the tool is
opening and closing.
WARNING
The hinge pins may not be removed.
8.5.8
Snap rings of hinge pins
See Fig. 13.
•
Check that the snap rings of the hinge pins (A) are present and are not damaged.
Have a Holmatro Certified Technician mount a new snap ring if it is missing or damaged.
GCT 51** (ST) (STA) EVO 3
All manuals and user guides at all-guides.com
916.001.650_002
EN
51