Tabla de contenido
Publicidad
SECTUON Vo UTBLnTY AND DECORATIVE
STRTCHES
Blind Hem Stitch
(_ Stitch pattern selector:
K
(_ Presser foot:
Zigzag foot
Needle thread tension:
1 to 4
K
®
(_ Lightweight fabric
_) Heavyweight fabric
_) Wrong side (Bottom side) of fabric
On heavyweight fabrics that ravel, the raw edge should be
overcast first. Then fold the hem, as illustrated, leaving
1/4"(0.7 cm) of the hem edge showing.
Position the fabric, so that the needle at its leftmost
position just pierces the edge of the fold.
After hemming is completed, press together both sides of
the finished hem. The top side of the fabric should show
only the blind stitches.
®
Lace Work
(_ Stitch pattern selector:
K
(_) Presser foot:
Zigzag foot
(_ Needle thread tension:
1 to 4
K
®
Lace adds a fanciful, feminine touch to blouses and
lingerie. Table linens and pillows become more elegant
when trimmed with lace.
Fold the raw edge of the fabric at least 5/8" (1.5 cm). Place
lace underneath and topstitch with blind hem stitch. Trim
excess fabric close to stitching.
50
Publicidad
Tabla de contenido
