Twin Needle Stitches (Option) - Sears Kenmore 385.15343 Manual De Instrucciones

Twin Needle Stitches (Option)
(_ Stitch selector: E or F
(_) Presser foot: Zigzag foot
(_) Needle thread tension: 1 to 4
@ Needle: Twin needle (optional item)
NOTE: Do not set the stitch pattern selector at A, B, C, D,
G, H, I, J or K, otherwise the needle may hit the needle
plate or presser foot and could possibly break.
(_ Upper thread guide
(_ Check spring holder
Thread take-up lever
@ Twin needle (optional item)
Turn off the power switch. Pull up the additional spool pin.
Place a piece of felt on the additional spool pin. Make sure
you separate the two strands of thread and slip one strand
through the needle bar thread guide@on the left and the
other on the right.
Change the needle to a twin needle (_. Thread each needle
from front to back.
When you want to shift the fabric to change the sewing
direction, you must first raise the needle out of the fabric.
f
®
\
/
/
J
J
52