Twin Needle Stitches (Option) - Sears Kenmore 385.16528000 Manual De Instrucciones

Twin Needle Stitches (Option)
(_ Stitch selector:
Stitch width:
Stitch length:
Needle thread tension:
Presser foot A:
Presser foot F:
_'_ Needle:
12to 18
1 to 2.5
Gold stretch stitch position
or green zone
3to 7
Zigzag foot
Satin stitch foot
Twin needle (optional item)
Upper thread guide
Check spring holder
_) Thread take-up lever
(_ Needle bar thread guide
Twin needle (optional item)
Turn off the power switch. Insert an additional spool pin in
the hole for the additional spool pin. Place a piece of felt
and a spool on the additional spool pin. Prepare the needle
thread for the additional spool pin.
For threading of twin needle sewing, follow the chart
making sure you separate two threads, placing one in each
thread guide on the side of the needle bar(_.
Change the needle to a twin needle @. Thread each
needle from front to back.
NOTE:
To change the direction of sewing, turn the handwheet to
make the needle be in the up position. Do not use a
stitch width over the twin needle sewing zone ( '_ ).
S
® ® ®
o°r \
ou
J
J
66