Publicidad
Idiomas disponibles
Idiomas disponibles
If you press "START/+30 SEC." again, the procedure will be saved as the memory 2
and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, press "0/MEMORY" twice in waiting state, and
screen displays "2", then press "START/+30SEC." to start cooking.
20. Inquiring Function
1) In cooking state, press "CLOCK/KITCHEN TIMER", the screen will display clock for three
seconds.
2) In the microwave cooking state, press "POWER" to inquire microwave power level, and
the current microwave power will be displayed. After three seconds, the oven will turn back
to the previous state. In multi-stage state, the inquiring way can be done by the same way
as above.
21. Cooking End Reminding Function
When the cooking is over, the buzzer will sound 5 "beep" to remind you the cooking is
finished.
22. Other Specifications
1) In standby state, if the set clock digital tube displays current time, the icon " : " would
flash; otherwise, it shows " 0:00 ".
2) In setting function state, the screen displays corresponding setting.
3) In working or pause state, the screen displays surplus cooking time.
English-15
Publicidad
