Gaggia TS Instrucciones De Uso página 16

1. INSTRUCTIONS BOOKLET CONSERVATION
AND USE
The present instructions booklet has been prepared for the
machine user, the owner and the installation technician and must
be always available for reference purposes.
The manual is destined for the user, the maintenance technician
and machine installation technician.
The purpose of the instructions booklet is to indicate the envisaged
uses of the machine for which it has been designed, its technical
features and in order to provide advice on correct use, cleaning
and regulation. It also provides important maintenance
information, and details on any residual risks, and all those
operations which require particular care.
The present manual is to be considered as an integral part of the
machine and must be CONSERVED FOR FUTURE REFERENCE
until the final dismantling of the machine.
This instructions booklet must always be available for consultation
and must be kept in a protected and dry place.
In the event of loss or damage to the same, the user may ask the
manufacturer or local dealer for a new manual, indicating the
machine model and serial number of the same as indicated on
the identification plate.
The present manual reflects the state of the art, at the time of its
preparation, the manufacturer however reserves the right to revise
production and subsequent manuals without being obliged to
update previous versions.
The manufacturer declines all responsibility in the event of :
- the improper or incorrect use of the coffee machine
- use that fails to comply with that specifically stated in the present
booklet
- serious lack of maintenance as envisaged or recommended
- machine modifications or any non-authorized intervention
- use of either non-original or non-specific spares
- total or partial failure to observe the instructions
2. ENVISAGED MACHINE USE
The machine must be operated by a single operator only.
The authorized operator must have firstly read and fully understood
all the instructions contained in the present booklet to ensure
correct machine function.
This machine is specifically intended for the professional
preparation of espresso coffee using blended coffee, as well as
the drawing and delivery of water and/or steam.
Its components are made of resilient non toxic materials, and
they are easily accessible for cleaning or maintenance operations.
This machine is intended for internal use only.
Ambient temperature for the correct operation of the machine
5°C ÷ 40°C.
17
ENGLISH