EINHELL GE-WS 18/75 Li Manual De Instrucciones página 16

10. Troubleshooting guide
Problem
The motor does not
start.
The equipment
does not spray,
or only sprays at
reduced power,
even though the
tank is full.
Too much spray
mist.
Motor stops
suddenly.
Anl_GE-WS_18-75_Li_USA_SPK7.indb 16 Anl_GE-WS_18-75_Li_USA_SPK7.indb 16
EN
Possible cause
a) Equipment not switched on.
b) Connections on motor loose.
c) Battery not correctly inserted.
a) Nozzle completely or partly clogged.
b) The fi lter element in the handle is
completely or partly soiled.
c) Liquid too viscous and therefore
unsuitable.
a) Distance from object is too great.
b) Spray width too great.
Battery is empty.
- 16 -
Solution
a) Turn On/Off switch to "I"
(see 6).
b) Have the equipment checked
by a service center.
c) Remove battery and reinsert
(see 5).
a) Clean the nozzle (see 7.3).
b) Clean the fi lter element (see
section 7.4).
c) Remove liquid, clean
equipment and tank (see 7).
a) Reduce spraying distance
b) Reduce spray width (see
6.3.2).
Insert a charged battery
(see 5.3).
15.11.2022 12:43:22 15.11.2022 12:43:22