Control Elements; Setting Up And Connecting The Refrigerator - Dometic WAECO CoolMatic CRP-40 Instrucciones De Uso

CRP-40.book Seite 28 Montag, 27. September 2010 4:07 16

Setting up and connecting the refrigerator

5.1

Control elements

No. in
fig. 3, page 4
1
6 Setting up and connecting the
refrigerator
a Safety instructions for installation on boats
Please note the following instructions for installation on boats:
The device can be tilted sideways up to 30°. When setting up
the refrigerator, note that it must be fastened to take account of
this. If you have any questions regarding installation, consult
your specialist dealer.
Install the refrigerator so that the warm air produced can easily
flow away (either upwards or to the sides, fig. 4, page 4).
The appliance is designed for ambient temperatures between
+18 °C and +32 °C.
If the appliance is powered by the mains, ensure that the power
supply has a residual current circuit breaker.
– Observe all the other installation instructions in this section.
28
Explanation
Temperature controller
CoolMatic CRP-40