Publicidad
Assembly
Assembly of supports
• The four rubber mounts must be placed on the base
of the tubular frame to prevent damage to the tubular
frame caused by normal operating vibration.
• Insert the bolt from the bottom up into the large hole
of the rubber mount to fix it on the chassis and secure
it with a nut at the upper end.
• Repeat the operation with the rest of the supports.
Coupling assembly
• Insert the coupling (A) into the nut (B) as shown in
the graph.
• Place the seal (C) behind the coupling.
• Screw the nut into the inlet and/or outlet of the motor
pump (D).
B
A
C
Output
coupling
D
x4
Input
coupling
7
ENGLISH
Publicidad
