Mounting The Cable Cover - Citizen CT-S251 Manual De Usuario

CAUTION
 Always use the specified types of paper rolls.
 Confirm that the paper roll is set correctly.
 If the paper is skewed and not coming straight out of the paper cover, open it and
straighten the paper.
 Always pull a few cm of paper straight out of the printer if you open the paper cover while
paper is loaded.
 Press on the center of the paper cover to close it securely.
 Be careful of paper cuts while loading the paper.
 Do not touch the print head or auto cutter while the paper cover is open. Doing so may
cause a burn or cut.
3.10

Mounting the Cable Cover

1. Remove the screw for the ground wire.
2. Screw the screw for the ground wire into the cable cover and the body of the printer.
Screw for ground wire
— 34 —
Cable cover