The camera is not a diagnostic / medical equipment. The meas-
urement result cannot be used as a basis for medical diagnosis.
The external body temperature does not match the internal tem-
perature, as measured with a traditional thermometer.
In justified cases, the measurement should be verified using devic-
es having a medical certificate for human body temperature meas-
urement.
3.1
Turning the camera ON/OFF
In order to switch the camera on, press and hold
more than 3 sec. The camera will display the welcome logo and
commence the start-up, including the self-check. After completing the
self-check, the camera is ready to work and enters the mode of real-
time display of infrared image.
To switch OFF the camera press and hold
screen goes blank.
In order to obtain the correct indications, the camera must
stabilize them. Stabilization may take ca. 10 minutes after
the instrument is turned on.
26
3
Quick start
KT-120M – USER MANUAL
button for
button until the