Makita DRT50 Manual De Instrucciones página 17

Using the tilt base plate with the
trimmer base
To use the trimmer base with a square base plate,
remove the base plate from the tilt base, and then
attach it to the trimmer base.
► 1. Tilt base plate 2. Trimmer base plate
Using the tool with the offset base
The offset base is convenient for work in a tight area
such as a corner.
1 2
Using the trimmer base with the
offset base plate and grip
The offset base plate can also be used with a trimmer
base and a grip attachment (optional accessory) for
more stability.
1. Loosen the screws on the base plate, then remove
the base plate from the offset base.
► 1. Offset base plate 2. Trimmer base plate
2.
Attach the offset base plate to the trimmer base by
tightening the screws.
3. Attach the grip attachment and the bar type grip to
the offset base plate by tightening the screws.
1
2
► 1. Bar type grip 2. Grip attachment
The knob type grip removed from the plunge base can
be installed on the offset base instead of the bar type
grip.
17 ENGLISH
1 2