Citizen CT-S310II Manual De Usuario página 45

Selected item
Model
CITIZEN CT-S310
EPSON T88*
EPSON 203dpi*
Note:
*: EPSON is a registered trademark of Seiko Epson Corporation.
Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on
the printout.
1. Load paper.
2. While the paper cover is open, press and hold the FEED button while turning the
power on.
3. Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints "Memory SW (1)" and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
4. Press the FEED button.
The list of memory switches cycles through in order from "Memory SW (1)" →
"Memory SW (2)" → ... "Memory SW (10)" → "Save To Memory" → "Memory SW
(1)" → each time the FEED button is pressed.
Press the FEED button until the number for the memory switch you want to change is
printed.
Paper Character
width
58 mm
80 mm
58 mm Invalid
80 mm Invalid
58 mm
80 mm
Current memory switch
Automatic memory switch settings
MSW2-4
Full Col
space
Print
— WaitData
— WaitData
WaitData
Valid WaitData
WaitData
Valid WaitData
— WaitData
— WaitData
Current setting
— 41 —
MSW3-7 MSW8-1
CBM1000 Print
Mode Width
Invalid 384 dots
Invalid 576 dots
Invalid 360 dots
Invalid 390 dots
Invalid 512 dots
Invalid 546 dots
Invalid 420 dots
Invalid 576 dots
MSW6-2
Character
Space
—
—
0 dot
1 dot
0 dot
1 dot
—
0 dot