Tramontina TCP-320L Manual De Uso Seguro Y Adecuado página 16

3. COMPONENTS AND ASSEMBLY PROCEDURES FOR CHARCOAL
GRILL MODELS
3.1. MODEL TCP-320L (Reference nº 26500/003)
3.1.1. Components:
ITEM DESCRIPTION
1 LARGE SILICONE SUPPORT
2 SMALL SILICONE SUPPORT
3 UTENSIL FOR HANDLING COOKING GRATES
4 ENAMELED STEEL COOKING GRATE
5 ENAMELED STEEL CHARCOAL TRAY
6 ENAMELED STEEL BOWL
7 PAINTED STEEL TRIPOD
8 M6 HEADLESS SCREW
9 M6 WING NUT
10 METALLIC WASHER
11 CERAMIC WASHER
12 M5 SCREW
13 BAKELITE HOLDER
14 HOLDER'S STAINLESS STEEL BASE
15 ENAMELED STEEL LID
3.1.2. Assembly instructions
STEP 1
Attach the bowl (item 6) to the tripod (item 7) using the M6 headless screw (item 8), a
metallic washer (item 10), ceramic washers (item 13), and the M6 wing nut (item 9) as
shown in picture 01.
(The ceramic washer that is placed on the inside of the bowl must be between the bowl
and the metallic washer; the washer that is placed on the outside must be positioned
between the bowl and the tripod.)
9
Picture 01
QUANTITY
1
2
1
1
1
1
1
1
1
2
3
1
1
1
1
8
10
11
6
11
7
14
4
2
STEP 2
Insert the center hole of the tray (item 5) into the headless screw (item 8) and place the
cooking grate (item 4) on the edge of the bowl as shown in picture 02.
4
STEP 3
Align the M5 screw (item 12), a metallic washer (item 10), and a ceramic washer (item
11) in the lid hole (inside) and the holder' s base (item 14) on the outside of the bowl
(item 15). Then position the holder (item 13) on the base and tighten using a cross-head
screwdriver* as shown in pictures 03 and 04.
*The cross-head screwdriver does not come with the product.
13
14
11
Picture 03
10
12
16
13
15
11
10
3
12
5
8
10
11
6
11
7
9
1
5
Picture 02
15
Picture 04