Protecting The Environment - DeWalt DWS780 Manual De Instrucciones

saw Blades
ALWAYS USE 12" (305 mm) SAW BLADES WITH 1" (25,4 mm) ARBOR HOLES. SPEED RATING
MUST BE AT LEAST 4800 RPM. Never use a smaller diameter blade. It will not be guarded
properly. Use crosscut blades only! Do not use blades designed for ripping, combination blades
or blades with hook angles in excess of 7˚.
BLADE DESCRIPTIONS
APPLICATION DIAMETER
Construction Saw Blades (maximum thin kerf with anti-stick rim)
General Purpose 12" (305 mm)
Fine Crosscuts 12" (305 mm)
Woodworking Saw Blades (provide smooth, clean cuts)
Fine crosscuts 12" (305 mm)
Non-ferrous metals 12" (305 mm)
NOTE: For cutting non-ferrous metals, use only saw blades with TCG teeth designed for this purpose.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and RELIABILITY, repairs, maintenance and
adjustment (including brush inspection and replacement) should be performed by a
D WALT factory service center or a D
e
replacement parts.

Protecting the Environment

Separate collection. Products and batteries marked with this symbol must not be
disposed of with normal household waste.
Products and batteries contain materials that can be recovered or recycled reducing the demand
for raw materials. Please recycle electrical products and batteries according to local provisions.
spECIFICaTIoNs
aR
Voltage 220 V
Frequency 50 Hz
Power
Speed
TEETH
40
60
80
96
WALT authorized service center. Always use identical
e
DWs780
B2C B3 B2 BR
220 V 120 V 220 V 127 V
50 Hz 60 Hz 50–60 Hz 60 Hz
1675 W
3800
/min (rpm)
ENGlIsH
41