Rev-A-Shelf 448 Instrucciones De Instalación página 3

448SW-BCSC-8C directions:
STEP 1
Adjust the back stop by loosening
the 2 screws on the inside of the
frame using a #2 screwdriver (See
Figure 1).
#2 #2 #2
STEP 2
Attach the BLUM lock shaft in
between the left and right release
levers (See Figure 2).
#2
STEP 3
Remove the #6 x 1/2 flat head
screws from each lever lock
mounting bracket. (See Figure 3).
#2 #2 #2
STEP 4
Line up the release levers to
mounting holes on back mounting
bracket. Flip over the release
levers and mounting brackets to
screw the release levers to the
back mounting brackets using
(4) M4 X 6 flat head screws (See
Figure 4).
#2 #2 #2
STEP 4
Using the (14) #6 x 1/2 flat head
screws, screw the brackets with
the release levers attached back
into the frame. (See Figure 5).
FIG. 1
FIG. 2
FIG. 3
FIG. 4
Screw locations
FIG. 5
INSTALLATION INSTRUCTIONS: 448 SWIVEL SHELF
Loosen
Lever lock mounting brackets
Bottom View
Screw locations
3