Laufen EMS-8 Serie Manual página 35

5 Programming
5.5 Parameter list EMS-8x-DU
No. Parameter name/Parameter explanation
Cash counter 1:
EMS-81
Counter is increased with each Coin (amount of coins)
P01
Cash counter 1: Counter is increased with the value of each Coin
EMS-82
(and value of Token if P28 is ON)
EMS-81 Cash counter 2: (not erasable) counts as P01
P02
EMS-82 Cash counter 2: (not erasable) counts as P01
P03 EMS-82 Token counter 1: Counter is increased with each Token
P04 EMS-82 Token counter 2: (not erasable) counts as P03
P05 Customer counter 1: Counter is increased on each device start
P06 Customer counter 2: (not erasable) counts as P05
Count token value: If ON, the token value (P08) is added to the cash
P07 EMS-82
counter P01 and P02
Token value: Cash value of a single token
P08 EMS-82
Operating hours 1: Operation Hours in hours and minutes
P10
Operating hours 2: (not erasable) as P10
P11
Minimum insertion: Specifies the amount of coins, that has to be inserted at least
EMS-81
P20
Minimum insertion: Specifies the amount of coins, that has to be inserted at least
EMS-82
Time release: Specifies the time release on minimum insertion (P20).
P21
Maximum time: Specifies the maximum time, that can be sold per operation in
P22 minutes and seconds (EMS-81 does not count coins after max. time is reached;
EMS-82 will block coins)
Session time-out: Specifies the max. time of a single session
P24
including all stop times (for example see figure 5)
Auto-stop time: Specifies the seconds after which a water discharge is automati-
P25 cally stopped. After an autostop the unit can be restarted for the remaining time (for
example see figure 5)
P26 Start button enabled: If ON, the input for the Start/Stop-Button is enabled.
Hygiene flushing after non-use: Specifies the time after last use in hours when a
P27
hygiene flushing is started. 0 = no flushing
Hygiene flushing duration: Specifies the hygiene flushing time in seconds.
P28
0 = no flushing
Cold water delivery time: Specifies the time of a free cold water delivery free
P29
of charge (not in flow control mode) 0 = no cold water delivery
Test mode: Test Mode of device can be started
P30
P31 In operation: If OFF, the device can be switched out of service (in case of failure).
Storage: If ON, the remaining time will be saved in case of power failure, so that
P32 the operation is continued after the power failure. If OFF, the device is free after a
power failure
Flow control operation mode: If ON, the time period begins with the removal of
P38
hot water
Software version: See chapter 6.3
P99
DE/FR/IT/EN/ES/NL/CS/LT/PL/HU/RU/BG
35
Typ Range
Counter 0 bis 99.999
Counter 0 to 99.999,99
Counter 0 to 99.999
Counter 0 to 99.999,99
Counter 0 to 99.999
Counter 0 to 99.999
Counter 0 to 49.999
Counter 0 to 49.999
Switch On / Off
Operat. 0,01 to 599,99
Counter 0 to 99.999:59
Counter 0 to 99.999:59
Operat. 1 to 100
Operat. 0,01 to 599,99
Operat. 0:01 to 999,59
Operat. 0:01 to 999,59
Operat. 0:01 to 999,59
Operat. 0 to 240
Switch On / Off
Operat. 0 to 23
Operat. 0 to 240
Operat. 0 to 600 s
Switch Start/Stop
Switch On / Off
Switch On / Off
Switch On / Off