Publicidad
Idiomas disponibles
Idiomas disponibles
EN-4
2
INSTALLATION
Carefully unpack the meter.
2.1
Package contents
The model ST300C-B (Basic Model)should have the following items
ST300C-B
STARTER 300C meter
AAA battery
1413 µS/cm standard solution
12.88 mS/cm standard solution
Electrode Clip
IP54 electrode caps
Wrist Strap
In addition to ST300C-B content, the ST300C Kit also includes the conductivity electrode
STCON3:
STCON3
The best measurement range for STCON3 4-ring (4-pole) cond. electrode is 70 μS/cm-200mS/cm.
In this range the measurement accuracy can reach 0.5%.
If you use STCON3 to measure pure water in which conductivity value is below 70 μS/cm, the
measurement will be less accurate (approximately 1% to 5%).
Does not use STCON3 to measure conductivity value less than 2 μS/cm, the accuracy is > +/-5%.
Accessories:
Model
Description
4-ring cond. electrode
(70 μS/cm-200mS/cm, 0.5% accuracy; )
STCON3
( 2-70 μS/cm, 1-5% accuracy)
Pure water cond. electrode
(0.02μS/cm-200 μS /cm; 0.02 μS/cm
STCON7
accuracy)
Standard Conduct 10 μS/cm 250ml
Standard Conduct 84 μS/cm 250ml
Standard Conduct 1413 μS/cm 250ml
Standard Conduct12.88mS/cm 250ml
Portable Bag for portable meters
STARTER 300C Portable Conductivity Meter
Units
1
4
1 bottle (about 20ml)
1 bottle (about 20ml)
1
1 set
1
1
P/N
83033972
30080693
30100441
30100442
30100443
30100444
30031635
Publicidad
