Descargar Imprimir esta página

melitta Purista F230-104 Manual De Instrucciones página 41

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 131
Press the "Service" button
2.
  
  
repeatedly until the display for the Auto
Off function appears.
Press the "Coffee strength" button
3.
  
repeatedly until the desired time is set.
You can call up the next function
4.
  
or exit Service mode:
a) Briefly press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2 seconds to save the setting
and exit the service mode.
6.3 Setting the water
hardness
Setting the water hardness regulates how
frequently you are requested to descale
the appliance. The harder the water, the
more frequently the appliance has to be
descaled.
Information
Water hardness cannot be set while using
a water filter (see section 7.5 Using a water
filter on page 48).
Determine the water hardness with the
enclosed test strip. Observe the instruc-
tions on the test strip packaging and in the
table Water hardness range on page 51.
The following settings are possible:
Display
Water hardness
soft, descale after 150 litres
medium, descale after 100 litres
  
hard, descale after 70 litres
     
very hard, descale after 30 litres
     
flash
no
A water filter is used. No adjust-
coffee beans
ment is possible.
Requirement: The appliance is ready for
operation.
Changing basic settings
Press the "Service" button for
1.
  
more than 2 seconds to call up Service
mode 1.
Press the "Service" button
2.
  
  
repeatedly until the display for the
Water hardness function appears.
Press the "Coffee strength" button
3.
  
repeatedly until the desired water
hardness is set.
You can call up the next function
4.
  
or exit Service mode:
a) Briefly press the "Service" button to
navigate to the next function.
b) Press the "Service" button for more
than 2 seconds to save the setting
and exit the service mode.
6.4 Activating/deactivating
switch-off rinsing
Rinsing is always carried out immediately
after switching on the coffee system. Only
switch-off rinsing can be activated/deacti-
vated. If it is activated, the coffee system is
rinsed after being switched off.
Information
We recommend that you do not per-
manently deactivate switch-off rinsing,
because switch-off rinsing cleans the
coffee system.
The following settings are possible:
Display
no coffee beans
Requirement: The appliance is ready for
operation.
Press the "Service" button for
1.
  
more than 2 seconds to call up Service
mode 1.
Switch-off rinsing
activated
deactivated
41

Publicidad

loading