Publicidad
Idiomas disponibles
Idiomas disponibles
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Contact the dealer from whom you purchased the appliance if you find that parts are missing or show damage.
Do not use the appliance unless missing parts have been delivered or defective parts have been replaced. Using an
incomplete or damaged appliance leads to personal injury and property damage.
Remove and safely discard any packaging material or promotional labels attached to the set.
Tools required for assembly: Phillips screwdriver (not included).
Risk of injury!
Danger!
Follow all assembly instructions listed here. Failure to follow these instructions can lead to problems and
risks while using the grill
1. Assemble the appliance completely and make all required adjustments prior to operation.
2. Follow the assembly and operation instructions closely. Use the figures as a visual guide.
3. Pay attention to small parts such as screws and nuts that are loosened or removed for assembly or during
adjustments. Keep them safe in order to avoid losing them.
4. The appliance is large. It is recommended to assemble by two people.
WARNING!
Use the appliance only after it has been completely assembled and adjusted!
IMPORTANT: Parts sealed by the manufacturer or the manufacturer's agent shall not be manipulated by the user.
NOTE: For all of the following steps, do not tighten any screws completely until all screws for that step have been
installed. Once all screws have been installed, then tighten them securely.
Step 1 Installing the casters
DD
EE
P
N
Use 16pcs of screw DD and 16pcs of flat washer EE to
install the casters P and K onto the bottom panel N.
PREPARATION
ASSEMBLY INSTRUCTIONS
.
K
EN-12
Step 2 Installing the door stopper
AA
N
Use 2pcs of screw AA to install the door stopper O onto
the bottom panel.
O
Publicidad
