Worx WX425 Manual De Instrucciones página 12

cut on the saw. Position the saw over the marked
area with the front edge of the base plate resting
on the work surface and cutting guide aligned
with marked line on workpiece. Ensure the blade
is not touching but is close to the work surface.
The moving lower guard must be rotated open by
using the lever. Switch on the saw and gently swing
the blade down into the material but maintain
a pivoting force on the front edge of the base.
The moving lower guard can now be released for
normal action of the guard.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots
clean. Keep all working controls free of dust.
If the supply cord is damaged, it must be replaced
12 12
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling advice.
Circular saw
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product,
Description Worx Circular saw
Type WX425 ( 4 - designation of machinery,
representative of Saw )
Function Cutting various materials with a
rotating toothed blade
Complies with the following directives,
2006/42/EC, 2011/65/EU&(EU)2015/863
2014/30/EU
Standards conform to
EN 62841-1, EN 62841-2-5,
EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne,
Germany
2021/4/16
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
EN