Publicidad
Idiomas disponibles
Idiomas disponibles
USE FOR ION GENERATOR
TO CHANGE AIR FLOW DIRECTION
UP / DOWN AIR FLOW DIRECTION
1
Press the LOUVERS button.
• The horizontal louvers will swing.
2
Press the LOUVERS button again to stop
the desired position.
CAUTION:
Never attempt to adjust the horizontal louvers manually.
• Manual adjustment of the horizontal louvers can cause the
unit to malfunction when the remote control is used for ad-
justment.
LEFT / RIGHT AIR FLOW DIRECTION
Hold the vertical louver as shown in the diagram
and adjust the air flow direction.
MAX DENSITY OPERATION
The unit releases max density Plasmacluster ions. By continuously discharging "extra high"
airflow for 30 minutes, the unit effectively.
1
Press the MAX DENSITY button during Ion
generator operation.
• The remote control will display " ".
• The red MAXIMUM lamp will light.
TO CANCEL
Press the MAX DENSITY button again.
• The red MAXIMUM lamp will turn off.
NOTES:
• You cannot set the fan speed during MAX DENSITY opera-
tion.
• The MAX DENSITY operation will be automatically can-
celled in 30 minutes, and the unit will return to the original
settings.
• MAX DENSITY operation and REFRESH operation can not
be used together.
CV-2P13SX_en.indd 24
EN-24
1
2
1
11.3.3 5:58:24 PM
Publicidad
