Stihl BR 450 C Manual De Instrucciones página 19

Electric start (BR 450 C)
The power tool is equipped with the
STIHL electric starter for convenient
starts.
The STIHL electric starter basically
consists of the following components:
Rechargeable battery, integrated in
–
control unit
Starter mechanism with starter
–
motor and starter gear
Starter switch
–
The battery supplies the starter motor
with the power required to start the
engine.
The battery is recharged while the power
tool is running – the power tool is always
ready to start.
The starter battery is not replaceable – it
is integrated in the control unit.
If the power tool is stored at
temperatures below 0°C it may cool
down to a point where a start is inhibited
to protect the battery.
The engine must then be started
manually.
Place the unit securely on the
N
ground and make sure that
bystanders and loose objects are
well clear of the nozzle outlet.
BR 450, BR 450 C
Make sure you have a firm footing:
N
Hold the unit with your left hand on
the carrying handle and grip the
control handle with your right hand.
Alternative:
Place the unit securely on the
N
ground and make sure that
bystanders and loose objects are
well clear of the nozzle outlet.
1
Slide the starter switch downwards.
N
Press the starter switch
N
As soon as the engine runs
2
Operate the throttle trigger (2).
N
Choke knob automatically returns to
N
the run position e when the throttle
trigger is operated.
At very low outside temperatures
Open throttle slightly – warm up the
N
engine for a short period.
2
English
17