Descargar Imprimir esta página

GreenWorks PTE346 Manual Del Operario página 4

Cortasetos telescópico
Ocultar thumbs Ver también para PTE346:

Publicidad

Idiomas disponibles

Idiomas disponibles

EN
1
DESCRIPTION
1.1
PURPOSE
This machine is intended for cutting and trimming
hedges and bushes in domestic use. It is not intended
to be used for cutting above shoulder level.
1.2
OVERVIEW
Figure 1
Small safety lock
1
button
Blade
2
Hedge trimmer
3
head
Coupler
4
Safety lock button
5
Trigger
6
2
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
battery-operated (cordless) power tool.
2.1
WORK AREA SAFETY
Keep work area clean and well lit.
areas invite accidents.
Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust.
which may ignite the dust or fumes.
Keep children and bystanders away while operating
Distractions can cause you to lose
a power tool.
control.
2.2
ELECTRICAL SAFETY
Do not expose power tools to rain or wet
Water entering a power tool will increase
conditions.
the risk of electric shock.
2.3
PERSONAL SAFETY
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
Rear handle
7
Battery release
8
button
Pivoting button
9
10 Carrying ring
11 Shoulder strap
WARNING
Cluttered or dark
Power tools create sparks
A lapse of
English
attention while operating power tools may result in
serious personal injury.
Use personal protection. Always wear eye
Protective products such as dust mask,
protection.
non-skid safety shoes, hard hat or hearing
protection used appropriately will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is
in the off position before connecting to power source
and/or battery pack and when picking up or carrying
the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
Do not over-reach. Keep proper footing and balance
This enables better control of the power
at all times.
tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts.
hair can be caught in moving parts.
2.4
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application.
do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the switch does not turn
Any power tool that cannot be
it on and off.
controlled with the switch is dangerous and must be
repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
Such preventive safety measures
power tools.
reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
Many accidents are caused by poorly
before use.
maintained power tools.
Keep cutting tools sharp and clean.
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into
account the working conditions and the work to be
Use of the power tool for operations
performed.
different from those intended could result in a
hazardous situation.
4
Loose clothes, jewellery or long
The correct power tool will
Properly

Publicidad

loading