WIKA 32 Manual De Instrucciones página 12

6. Commissioning, operation
GB
6.3 Mounting
Before mounting
Before starting the work, make sure that the conditions for mounting
the thermometer are met:
The plant is disconnected and free from pressure.
■
The plant has cooled down to ambient temperature.
■
There is a threaded fitting at a suitable position in the plant.
■
A suitable sealing material is used.
■
12
WARNING!
Only use suitable sealing material!
Hot media might escape if unsuitable sealing material
■
is used.
Unsuitable sealing material may cause damage to the
■
plant and pollution of the environment.
Use a sealing material that is suitable for the tempera-
■
ture range, and that is resistant to the medium being
measured.

WIKA operating instructions model 32
