Publicidad
Idiomas disponibles
Idiomas disponibles
WINDOW INSTALLATION INSTRUCTIONS—
15,000-24,000 BTU MODELS
Prepare Air Conditioner for Installation
WARNING
Excessive Weight Hazard
Use two or more people to move and install
air conditioner.
Failure to do so can result in back or other injury.
1.
Unpack the Air Conditioner
Remove Packaging Materials:
Handle the air conditioner gently while unpacking the unit.
■
Place the air conditioner on a hard, flat surface.
■
Remove tape and glue residue from surfaces before turning
■
on the air conditioner. Rub a small amount of liquid dish soap
over the adhesive with your fingers. Wipe with a damp cloth
and dry.
Do not use sharp instruments, rubbing alcohol, flammable
■
fluids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your air conditioner.
Remove any packaging materials inserted into the side
■
louvers.
Dispose of/recycle packaging materials in an appropriate way.
■
2.
Remove filter and front panel
Pull down the front panel and remove the filter. Lift the front panel
upwards and remove from the air conditioner. Place to the side.
10
3.
Remove faceplate screws
Remove the four faceplate screws.
NOTE: The faceplate screws must be reinstalled before mounting
the air conditioner.
4.
Remove faceplate
Gently remove the faceplate from the air conditioner cabinet.
5.
Remove control panel screw
Remove the control panel screw from the front panel.
Publicidad
