Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: The remote control has already been
paired to the ceiling fan for your convenience.
If you have two of the same model fans in
your home, please follow the steps below to
control each fan independently.
1. Remove the battery cover and install 12V
battery.
2. Press the fan on/off button for 5 seconds
then release , If pairing is successful light
kit will flash two times and blades will
begin to spin.
Remote Control - Your fan is equipped with a
remote control to operate the speed and lights
of your new ceiling fan (Figure 16).
Key -
High speed
Key -
Medium speed
Key -
Low speed
Key -
Light on/off and dimmer (press
and hold to dim light)
Key -
Fan reverse (inside battery
compartment on the backside
of the remote control)
Key -
Fan off
Speed settings for warm or cool weather depend
on factors such as room size, ceiling height,
number of fans, and so on.
Warm weather - (Forward) A downward air
flow creates a cooling effect as shown in Figure
17. This allows you to set your air conditioner
on a higher setting without affecting your
comfort.
Cool weather - (Reverse) An upward air flow
moves warm air off the ceiling are as shown in
Figure 18. This allows you to set your heating
unit on a lower setting without affecting your
comfort.
Model:UC7085T
FCC ID:CHQ7085T
IC:2968A-7085T
Complies with Canada
RSS-210
MADE IN CHINA
Fan reverse
Airpro
R
12V
Figure 18
8. Operating Your Fan
Figure 17
Figure 18
Publicidad
