Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning the Pump Filter
Due to the nature of the front-load washer, it is sometimes possible for
small articles to pass to the pump. The washer has a filter to capture lost
items so they are not dumped to the drain. To retrieve lost items, clean out
the pump filter.
1. Using a coin or flat screwdriver in the notch on the door, open the
access door.
2. Place a shallow pan or dish under the pump access door and towels on
the floor in front of the washer to protect the floor. It is normal to catch
about a cup of water when the filter is removed.
3. Pull down the pour spout.
Pour
spout
26
Pump filter
V .1
Publicidad
