Dometic CoolAir RTX1000 Requisitos De Instalación página 8

Requirements for installation
The weights of the parking coolers totals are:
• RTX1000 24 V: approx. 22.8 kg
• RTX2000 24 V: approx. 31.5 kg
• RTX1000 12 V: approx. 24 kg
• RTX2000 12 V: approx. 33 kg
1.2 Electrical requirements
• Battery capacity: min. 170 Ah for each battery.
To guarantee an optimal operating time, two batteries with 225 Ah each or
greater are recommended.
• Input voltage:
– 12 V
– 24 V
1.3 Constructional requirements
Before installing the parking cooler, check whether any vehicle components
could be damaged or have their function impaired as a result of the installation,
see dimensions.
Dimensions:
• RTX1000/RTX2000 Uni1: fig. 1, page 3
• RTX1000/RTX2000 Uni2: fig. 2, page 4
• RTX1000/RTX2000 Uni3: fig. 3, page 5
The maximum dimension refers to the contact face required for the seal. The min-
imum size refers to the diameter of the opening required.
For parking coolers with cover frame: The cover frame is screwed from below to
the air conditioner inside the cab. This requires a certain area of roof lining to be
available (see fig. 1, page 3 to fig. 3, page 5).
The angle of the installation area must be observed. The defined values apply to
the vertically and to the horizontally aligned unit.Larger tilt angles may cause
damage to the compressor. Where appropriate, the tilt of the unit can be
adjusted with spacer sleeves.
8
parking coolers: between 10 V
parking coolers: between 20 V
RTX1000, RTX2000
and 15 V
and 30 V
EN