compact structure and elegant design are suitable for indoor installation.
Multiple Functions
The special design of the air inlet and outlet makes the unit suitable for various ways of
connections. With different ways of installation, the unit can work as just a heat pump but
also as a fresh air blower, a dehumidifier, or an energy recovery device.
Other features
Stainless steel tank and an electronic anode and magnesium stick assure the durability of
components and the tank.
High efficiency compressor with R134a refrigerant.
Electrical element available in the unit as a back-up, assuring constant hot water even in
extreme cold winters.
SAFETY INSTRUCTIONS
To prevent injury to the user, other people, or property damage, the following instruc-
tions must be followed. Incorrect operation due to ignoring of instructions may cause
harm or damage.
Install the unit only when it complies with local regulations, by-laws and standards.
Check the main voltage and frequency. This unit is only suitable for earthed sockets,
connection voltage 220 – 240 V ~ / 50Hz.
The following safety precautions should always be taken into account:
Be sure to read the following WARNING before installing the unit.
-
Be sure to observe the cautions specified here as they include important items re-
-
lated to safety.
After reading these instructions, be sure to keep it in a handy place for future ref-
-
erence.
Warning
Do not install the unit yourself.
Incorrect installation could cause injury due to fire, electric shock, the unit falling or
leakage of water. Consult the dealer from whom you purchased the unit or a special-
ized installer.
Install the unit securely in a place.
When insufficiently installed, the unit could fall causing injury. The bearing surface
4
V.1