Publicidad
Idiomas disponibles
Idiomas disponibles
turned 'OFF'.
Short press this button to exit the parameter setting or checking.
3.
And
buttons
- These are the multi-purpose buttons. They are used for the temp setting, parame-
ter setting, parameter checking, clock adjustment and adjustment of the timer.
- During running status, press
directly.
- Press these buttons when the unit is on clock setting status, the hour(s) and the
minute(s) of the clock time can be adjusted.
- Press these buttons when the unit is on timer setting status, the hour(s) and the
minute(s) of the timer 'ON'/'OFF' can be adjusted.
4．
button
Clock setting:
- Long press
- After screen is light, short press
"88:" flash, press the
- After hour setting, short press
flash, press the
- Press
button again to confirm and exit.
Timer setting:
Press and hold
entering the time setting, press the time button to set the clock and minute of the
timed on/off (when the clock or minute flashes, combine
minutes can be adjusted). The timed on/off can be set independently. When the
timed "ON" flashes, it means to cancel the timed start function. At this time, press the
button "ON" does not flash to indicate that the timed start function is on, then
press the
button, "ON" flashes to cancel. Timed start function; continue to press
the time button. When "OFF" appears, you can set the timed shutdown. When "OFF"
flashes, it means to cancel the timed shutdown function. At this time, press the
button, "OFF" does not flash to indicate that the timed shutdown function is on, then
Click the
button, and "OFF" flashes to cancel the timed shutdown function.
3s to unlock the screen;
and
buttons to set the exact hour(s);
and
buttons to set the exact minute(s);
the time button 3S to enter the timed on/off setting state. When
or
button to adjust the setting temperature
to entry the clock setting interface, hour icon
button to switch to minute setting, minute":88"
19
and
. The clock and
V.1
Publicidad
