5. MIDI OPERATION
Setting MIDI IN
1. Tap the Flash button 1 three times while
holding down the Record button, the Segment
Display reads "CHI" indicating MIDI IN channel
setup is available.
2. Tap the Flash button numbered from 1-16 to
assign MIDI IN channel 1-16, the relevant chan-
nel LED lights indicating MIDI IN channel is set.
Setting MIDI OUT
1. Tap the Flash button 2 three times while hold-
ing down the Record button, the Segment Dis-
play reads "CHO" indicating MIDI OUT channel
setup is available.
2. Tap the Flash button numbered from 1-16 to
assign MIDI OUT channel 1-16, the relevant
channel LED lights indicating MIDI OUT channel
is set.
Exit MIDI Setting
Press and hold down the Record button. While
holding down the Record button tap the Rec Exit
button to exit MIDI setting.
Receiving MIDI File Dump
Tap the Flash button 3 three times while holding
down the Record button, the Segment Display
reads "IN" indicating the controller is ready to re-
ceive MIDI file dump.
English version
| Tecshow Navigator 48 MKII
P. 15