Sony Caller ID IT-M602 Manual De Instrucciones página 9

To connect the phone to two separate outlets
"DATA" jack
To "LINE 1/
LINE 1+2"
Notes
• Use only the supplied AC-T69 AC power adaptor. Do
not use any other AC power adaptor.
• Connect the AC power adaptor to a continuous power
supply.
• Place the phone close to the AC outlet so that you can
unplug the AC power adaptor easily.
Tips
• If your telephone outlet is not modular, contact your
telephone service company for assistance.
• L1 is the first phone line connected to center pair of
wires. L2 is the second phone line connected to outer
pair of wires.
2
To DC IN
"12V"
To "LINE 2"
Telephone line cord (supplied)
1
Telephone line cord (supplied)
1
Connect the telephone line cords to the "LINE
1/LINE 1+2" and "LINE 2" jacks and to the
telephone outlets.
2
Connect the AC power adaptor to the DC IN
"12V" jack and to an AC outlet.
Hook the cord.
To an AC outlet
AC power adaptor
(supplied AC-T69)
To the telephone
outlets
Polarity of the plug
Modular
L1
L2
Line 2
Line 1
continued
EN
9
Getting Started