Troy-Bilt 41CDZ25C766 Manual Del Operador página 20

IF... the engine is already warm: Move the choke lever to Position 3. Press and hold the throttle
lockout. Squeeze and hold the throttle control. Pull the starter rope with a controlled and steady
motion until the unit starts.
STOPPING INSTRUCTIONS
1. Release the throttle control and allow the engine to idle.
2. Press and hold the On/Off switch in the Off (O) position until the engine comes to a complete stop
(Fig. 10).
Throttle
Lockout
Throttle Control
Position 1
Choke Lever
Position 2 Position 3
(I = On / O = Off)
Fig. 10
Fig. 11
20
On/Off Switch
Primer Bulb