Publicidad
Idiomas disponibles
Idiomas disponibles
Presentation
Thank you for purchasing FT Injectors. In this manual you will find all the information you will need to ensure proper operation, configuration and
maintenance of your injectors.
The FT Injector is available flow rate: 170 lb/h
Each FT Injector is made with the best possible materials, including corrosion-resistant internals, allowing them to be used with any fuel from gasoline
to Nitromethane, Nitropropane and even fuels that contain MTBE and ETBE. Silver plated terminals ensure the best electrical connection possible
along with an EV1 style connector for positive locking and vibration resistance.
Warranty terms
The use of this equipment must be in complete compliance within the terms set out in this manual, failure to do so excludes the manufacturer from
all responsibility.
This product is not certified for aeronautic purposes or any flying vehicles, as it has not been designed for such applications.
Before starting any electrical installation, disconnect the battery.
This product is not certified for aeronautic purposes or any flying vehicles, as it has not been designed for such applications.
In some countries where an annual inspection of vehicles is enforced, no modification in the OEM ECU is permitted. Be informed about local laws and
regulations prior to the product installation.
Important warning for proper installation of this product:
Always remove and insulate unused wires. NEVER roll up excess wiring as this may create an antenna that
captures electromagnetic interference that may generate product malfunction.
3
EN
Publicidad
