1
2
3
98
Equalizer Operation
Surround Operation
Adjusting the Surround
Settings
You can adjust the Surround settings for your
preference.
3
2
Select the surround mode (other than normal)
to adjust.
See DSP Surround Presets (page 96).
Press and hold the DSP button for at least 2
seconds within 10 seconds of Step 1 .
Press either the 9 DN button or the UP 8
button within 10 seconds of Step 2 and adjust
the surround level.
The surround level can be adjusted between
the range of –4 and +4.
Notes when setting Surround/Equalizer/
L.P.S.
•
•
While making this adjustment, other
operations will not be accepted.
When turning the unit power on for the first
time after resetting, each mode is set to
default.
English