Porsche E-Performance Standhalterung Manual De Instalación página 16

Scope of delivery
Scope of delivery
– Porsche E-Performance Charging Pedestal
1)
with Foundation Fastening Kit
– 1 key for the front panel
– Installation manual
1)
Contents of foundation fastening kit:
– Foundation fastening kit installation
instructions
– Foundation illustration with reinforcement
diagram
– Drilling template
– 1x embedment tool (hexagon socket
head bolt)
– 4x Hilti HAS anchor rods M12x110
– 4x Hilti HVU anchor capsules
– 8x M12 nuts and A13 washers
Parts overview
1. Lock
2. Mounting panel for charging dock
3. Area for installing the infrastructure socket
4. Entry for mains cable
5. Front panel
6. Base frame with foundation fastening
Information
The mains cable and infrastructure socket are not
included in delivery and must be purchased locally
in line with regulations in the country of use (see infra-
structure connection of the Porsche Universal Charger
(AC)). Your Porsche dealer will be happy to advise you.
Information
Carefully take the charging pedestal out of the packaging and
inspect for damage. We cannot accept complaints made
after installation is complete.
16
Fig. 1: Overview of charging pedestal
Installation
Required accessories
1
The following components are not included in
delivery and must be purchased locally in line with
regulations in the country of use (see infrastructure
2
connection of the Porsche Universal Charger (AC)):
– Control unit: Porsche Mobile Charger Connect
3
– Charging cable
4 – Power cable: The cable length must be decided
by a qualified electrician based on the regulations
in the country of use
– Charging dock
5
– Infrastructure socket:
This is described in detail in the Porsche Mobile
Charger Connect manual.
– Grouting mortar (compressive strength
min. 120 N/mm²)
– Foundation (provided on site or as described
below)
Required tools
– Percussion drill
– Drill bit Ø14 (length approx. 130 mm)
– Size 6 Allen key
– Size 19 combination wrench or torque wrench
– Glass suction lifter
Selecting the installation location
6
▶ Pay attention to standards and regulations in your
country.
▶ If necessary, install collision protection to protect
the charging pedestal, e.g. if it is installed in a spot
that is at risk of collision, such as in a street
without existing protection.