Appliance Self-Test; Starting The Appliance Self-Test; Ending The Appliance Self-Test; Customer Service - Bosch B0IB Serie Instrucciones De Uso

Appliance self-test

Your appliance features an automatic self-test program
which shows you sources of faults which may be
repaired by customer service only.

Starting the appliance self-test

1. Switch off the appliance and wait 5 minutes.
2. Switch on the appliance and then press and hold
down the super button 2 for 3–5 seconds within the
first 10 seconds until an audible signal sounds.
The self-test program starts.
While the self-test is running, a long audible signal
sounds in the meantime.
If 2 audible signals sound and the set temperature is
displayed after the self-test has ended, your appliance
is OK.
If 5 audible signals sound and the freezer compartment
super button flashes for 10 seconds after the self-test
has ended, there is a fault. Inform customer service.

Ending the appliance self-test

When the program has ended, the appliance switches
over to normal operation.

Customer Service

If required, we recommend that you have the door
hinges changed by our customer service. You can
learn the costs for changing over the door hinges from
your customer service.
Before you call customer service, see the chapter
"Rectifying minor faults yourself".
After checking according to the chapter "Rectifying
minor faults yourself", additional help can be requested
by calling the Bosch Customer Support Center, 1-800-
944-2904 (toll-free), from anywhere in the United
States.
In Canada contact your Bosch customer service or call
1-800-944-2904.
Write down the following information about your
appliance so you have it ready and can get better
assistance when calling customer service.
Dealer's name:
Address:
Telephone number:
Purchase date:
Model number:
FD number:
Serial number
Type
en-us
E - Nr
FD - Nr
19