Publicidad
Idiomas disponibles
Idiomas disponibles
FAST START QUICK REFERENCE GUIDE
Spraying Instructions
1
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS
1. Read all warnings and safety
instructions in the owner's
manual before use.
5
See manual for grounding
instructions
5. Plug sprayer into outlet.
Cleaning Instructions
1
1. Unplug sprayer, remove
container, and empty contents.
This is only a quick reference.
Read the entire instruction manual prior to using the product.
2
2. Thin material as necessary.
(See page 6.) Remove and fill
container with material. Use a
filter to strain material if it is old.
6
6. Adjust spray pattern to horizontal,
vertical, or cone. (See page 7.)
2
2. Fill sprayer with cleaning
solution, plug in sprayer, and
operate trigger until solution
comes through nozzle. Do not
submerge in liquid.
FINISH MAX
FINE FINISH SPRAYER
®
3
3. Insert the pick-up tube into the
cylinder housing. See Page 5,
Figure B to determine orientation
of pick-up tube.
7
7. Set the flow to maximum by
turning the volume control knob
fully clockwise.
3
3. Remove parts. Clean and dry
thoroughly according to Step
Two of the Clean Up instructions.
See page 8.
(C800766, C900076)
4
4
4. Attach container to sprayer.
8
HAZARDOUS VAPORS
8. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
ENGLISH
Publicidad
